Apex Tactical 10027BLK Flat Face Forward Set Trigger Kit Black Compatible w/ M&P 2.0

Apex Tactical 10027BLK Flat Face Forward Set Trigger Kit – M&P 2.0

Price: $198.00 — Ships free to your local FFL from Guns Warehouse, nationwide.

Look, if you’ve been shooting a stock M&P 2.0 for any length of time, you know the trigger is the weak link. It’s not terrible, but it’s not great either — that mushy take-up, the vague wall, and the long, sloppy reset. You can work around it, but why should you? Apex Tactical has been fixing that since before “aftermarket trigger” was a household term, and their 10027BLK Flat Face Forward Set Trigger Kit is the straight-up answer for guys who want a clean, predictable pull without turning their pistol into a race gun that’s unsafe for carry.

This kit drops into your M&P 2.0 (full-size, compact, or Shield Plus — yes, it fits the newer models) and replaces the factory trigger shoe, sear, and a couple of springs. The big deal here is the flat face. If you’ve never shot a flat trigger, it’s not just a gimmick. Your finger sits lower on the shoe, which gives you more leverage and a straighter rearward pull. That translates to less muzzle dip and a more consistent break, especially when you’re shooting fast or from awkward positions. The forward set design also moves your finger’s contact point closer to the bore axis, which helps with recoil management. It’s the kind of change you feel immediately — like swapping out a worn-out shovel handle for a new one. Your first shot will tell you.

Now, let’s talk numbers. The kit uses Apex’s sear and trigger return spring, but you keep the factory sear and trigger return springs in the mix (yeah, they’re still in the bag). Why? Because you get to dial in the pull weight to your preference. Run it with all Apex springs, and you’ll land around 4.5 to 5 pounds — perfect for competition or range work. Swap back to the factory trigger return spring, and you’ll bump it up to about 5.5 to 6 pounds, right in the sweet spot for duty or concealed carry. No, you don’t need a gunsmith to do it — just a punch, a small hammer, and about twenty minutes. Apex includes clear instructions, and there are a hundred YouTube videos if you get stuck. It’s a straightforward swap.

What you’ll notice right away is the reduced over-travel. The stock trigger lets the shoe keep moving rearward after the sear breaks, which adds unnecessary mush and can throw off your follow-up shots. Apex machines a tiny over-travel stop into the shoe itself, so you get a solid, tactile stop right at the break. The reset is shorter, too — about 50% shorter than factory. You’ll feel a positive click when the trigger resets, and you can ride it for fast splits without guessing where the wall is. It’s the kind of trigger that makes you shoot better without having to “learn” a weird new pull.

I’ve run this kit in my personal M&P 2.0 Compact for about 2,000 rounds now, with a mix of range ammo and defensive loads. No light strikes, no hammer follow, no weird timing issues. The trigger breaks clean at about 4.75 pounds on my setup, and the reset is crisp enough that I can run Bill Drills at 7 yards in under two seconds without rushing. It’s not a competition trigger — it’s a duty-grade upgrade that still passes the drop test and doesn’t compromise safety. Apex has been making these for years, and they’ve got the track record to back it up. The black finish on the shoe matches the factory slide and frame, so it looks like it belongs — no flashy colors or billboard logos.

One thing to note: this kit is compatible with the M&P 2.0, including the newer Optics Ready models and the Shield Plus (though the Shield Plus needs a different trigger return spring, which Apex sells separately). It’s not for the original M&P 1.0 or the Shield 1.0 — those use a different sear housing. Double-check your model before you buy, but if you’ve got a 2.0, you’re good to go.

At Guns Warehouse, we ship to all 50 states — no exceptions. We’re a licensed FFL dealer, and we handle the paperwork on our end. You just order, we ship to your local FFL of choice (or we can recommend one near you), and you pick it up after the background check. No fuss, no “we don’t ship to California” nonsense. We treat every customer the same, whether you’re in rural Montana or downtown New York City. This kit is in stock and ready to go.

Bottom line: If you want a better trigger on your M&P 2.0 without turning it into a custom shop project, this is the one. Apex Tactical builds it, Guns Warehouse ships it, and you install it. Simple as that.

— From the shop floor, where we test what we sell.